Triple
Connected Vehicle Roadside Equipment to Emergency Vehicle OBE: intersection status
Flow Description
Current signal phase and timing information for all lanes at a signalized intersection. This flow identifies active lanes and lanes that are being stopped and specifies the length of time that the current state will persist for each lane. It also identifies signal priority and preemption status and pedestrian crossing status information where applicable.
Solution Description
This solution is used within the U.S.. It combines standards associated with US: SAE Signal Control Messages with those for V-X: WAVE WSMP. The US: SAE Signal Control Messages standards include upper-layer standards required to implement signal control information flows. The V-X: WAVE WSMP standards include lower-layer standards that support connectionless, near constant, ultra-low latency vehicle-to-any communications within ~300m using the WAVE Short Messaging Protocol (WSMP) over the 5.9GHz spectrum. The broadcast mode is interoperable with M5 FNTP.
Triple Solution Gap
ITS Info
Mind the gapMind the gap
SAE J2735
CEN ISO 19091
SAE J2945/10
Click gap icons for more info.

Mgmt
No Standard Needed
Facility
Mind the gap
SAE J2735
SAE J2945/0
Security
Mind the gap
IEEE 1609.2
TransNet
IEEE 1609.3
SubNet
TransNet TransNet

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

SubNet SubNet

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

ITS Info ITS Info

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Mgmt Mgmt

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Facility Facility

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Security Security

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5