Triple
Map Update System to Connected Vehicle Roadside Equipment: roadway geometry
Flow Description
The physical geometry of a road segment that specifies the location and width of each lane, including normal lanes as well as special lanes for pedestrians and bicycles, transit vehicles, and trains. This flow also may include the curvature, grade, and superelevation or banking of the road segment.
Solutions
DDS: SAE Signal Control Messages - OMG DDS RPC
US: SAE Signal Control Messages - SNMPv3

(None-Data) - EU-ICIP-C2F
Solution Description
This solution is used within the U.S.. It combines standards associated with US: SAE Signal Control Messages with those for I-F: SNMPv3. The US: SAE Signal Control Messages standards include upper-layer standards required to implement signal control information flows. The I-F: SNMPv3 standards include lower-layer standards that support secure centre-to-field and field-to-field communications using simple network management protocol (SNMPv3); implementations are strongly encouraged to use the TLS for SNMP security option for this solution to ensure adeqaute security.
Triple Solution Gap
ITS Info
Mind the gapMind the gap
SAE J2735
CEN ISO 19091
SAE J2945/10
Click gap icons for more info.

Mgmt
Facility
Mind the gapMind the gap
SAE J2735
SAE J2945/0
ISO 15784-2
Security
Mind the gap
IETF RFC 6353
TransNet
SubNet
TransNet TransNet

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

SubNet SubNet

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

ITS Info ITS Info

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Mgmt Mgmt

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Facility Facility

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5

Security Security

TempBCL2 TempSTDL2

TempBCL3 TempSTDL3

TempBCL4 TempSTDL4

TempBCL5 TempSTDL5