|
Triple
Traffic Management Center to Connected Vehicle Roadside Equipment: restricted lanes application info
Flow Description
Restricted lane application configuration data and messaging parameters. This flow defines the location, duration, and operating parameters for lanes that are reserved for the exclusive use of certain types of vehicles (e.g., transit vehicles) or vehicles that meet other qualifications (e.g., number of occupants, low emissions criteria). It identifies the lane(s), the start and stop locations, start and end times, vehicle restrictions, speed limits and platooning parameters. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
|
|
Solution Description
This solution is used within the U.S.. It combines standards associated with (None-Data) with those for I-F: SNMPv3. The (None-Data) standards include an unspecified set of standards at the upper layers. The I-F: SNMPv3 standards include lower-layer standards that support secure centre-to-field and field-to-field communications using simple network management protocol (SNMPv3); implementations are strongly encouraged to use the TLS for SNMP security option for this solution to ensure adeqaute security.
|
|
Triple Solution Gap
|
|
ITS Info
Development needed
 |
Click gap icons for more info.
|
||
|
Mgmt
|
Facility
|
Security
IETF RFC 6353
|
|
|
TransNet
|
|||
|
SubNet
|
|||
